Drinktec 2017 - Pumps for Environmental Protection and Water Logistics TRNs Purify Waste Water
Jul 06 2017 Comments 0
Treating waste water can be tedious and expensive - but not if TRN submerged aerators are used. The Japanese manufacturer Tsurumi will be presenting a system for beverage manufacturers and also special waste water pumps for the food industry at its stand B3-531 at the Drinktec.
Tsurumi's TRN submerged aerators mix the tank and add large quantities of oxygen. "This technology does not require membrane jets which means it cannot become blocked," product manager Carsten Bode reiterates. This makes it highly interesting for breweries, producers of mineral water and dairies as it allows them to satisfy the discharge limits.
"TRN submerged aerators work along the same principle as submersible pumps, however they move air, not water. This means they are practically fail proof even if used permanently," says Carsten Bode. The oxygen bubbles required for the biological preclarification phase are generated by means of rotation. Almost as a side effect, the content of the tank is kept in motion to prevent sediments forming. The fans do not require a compressor, nor do they need to be attached to the structure because they are simply lowered onto the base of the tank. Only a power cable, suction line and retaining chain are required. The shape of the tank is also irrelevant.
If several fans are used, the clarification process runs without interruption should one unit need to be removed. There are ten models with motor outputs ranging from 0.75 to 40 kW in the product range. The TRN adds up to 600 m? air per hour. It is also well suited for expanding capacity levels or as a backup for existing systems. It is also possible to use the unit together with aerators from other manufacturers.
Titanium pumps for difficult media
As a result of its expertise as the world's largest construction pump manufacturer, Tsurumi will also be presenting numerous waste water pumps; for instance the new GY for fibrous, coagulating media. It is equipped with a multi-blade impeller and cutting device. The combination of stationary cutting ring and rotating blade is so efficient that cable cross-sections of 2 inch and upwards are sufficient. It will also be presenting special pumps made of rustproof steel (PU series) or titanium (TM series) for initial pumping of chemically aggressive media, and also LSC flat suction units that can even suction up puddles.
Users appreciate the durability and maintenance-friendly character of the 'Tsurumis'. The manufacturer also provides extensive support on site. The company strives to offer the best service in the industry. For more information, please visit the Tsurumi.eu website.
Do you like or dislike what you have read? Why not post a comment to tell others / the manufacturer and our Editor what you think. To leave comments please complete the form below. Providing the content is approved, your comment will be on screen in less than 24 hours. Leaving comments on product information and articles can assist with future editorial and article content. Post questions, thoughts or simply whether you like the content.
Jul 27 2017 Rome, Italy
Jul 29 2017 Tehran, Iran
Aug 23 2017 Melbourne, Australia
Aug 27 2017 Stockholm, Sweden
Sep 05 2017 Mexico City, Mexico