Soil Remediation

  • Innovative Sequencing Batch Reactor System

Innovative Sequencing Batch Reactor System

Jul 30 2008 Read 1851 Times

The OMNIFLO ISBR system has an inherent biological nutrient removal (BNR) capability through the use of automated controls that provide optimum environments for each BNR reaction. It also produces a very high-quality effluent at varying flows and loadings. The small
footprint OMNIFLO ISBR system produces a very low sludge yield of 0.05 to 0.25 pounds of biological solids per pound of BOD per day and, compared to a typical SBR system, provides increased flexibility as well as significant power savings.
Siemens (USA) ISBR system is ideally suited for plants that have high solids handling costs, high energy costs and tight effluent requirements. Installing just an SBR system helps plants meet state nutrient removal limits. But adding on a Cannibal system can also
reduce high energy costs associated with aerating an aerobic digester, reduce the need for installing sludge handling equipment, and generally provide a more energy-efficient solution. Significant reductions in the amount of solids generated for disposal are also ultimately realized.
The ISBR system has allowed the wastewater treatment facility at a California casino to minimize solids wasting to less than 0.1 pounds of biological solids per pound of BOD treated. The facility has also used less than 10% of the power for solids treatment than was planned with the proposed aerobic digester. A single integrated control system from
Siemens Water Technologies optimizes overall plant performance and serves as a single point-of-contact for the process. It also balances ISBR system operating conditions to help maintain effluent quality and minimize solids production.
Read comments0

Do you like or dislike what you have read? Why not post a comment to tell others / the manufacturer and our Editor what you think. To leave comments please complete the form below. Providing the content is approved, your comment will be on screen in less than 24 hours. Leaving comments on product information and articles can assist with future editorial and article content. Post questions, thoughts or simply whether you like the content.