• Order Received for Biogas Project with Gas Processing to Bring Biomethane to France
    The plant stands witness to the increasing importance of the processing of biogas to biomethane in France.
  • The plant in the north of the Franche-Comté region will be completed in spring 2015, after which it is expected to supply biomethane to the French natural gas grid at a rate of 70 standard m³/h.

Green Energy

Order Received for Biogas Project with Gas Processing to Bring Biomethane to France

Oct 03 2014

French agriculture has a wealth of raw and waste materials that are suitable for biogas plants. However,
only half of the available materials are presently used for energy production. Thus, ambitious development
plans have been drawn up: By 2020, the biomass share in the field of renewable energies in France
is to rise to about 50 percent.

No wonder that that the number of RFPs for plant projects for the generation of energy from biomass is on
the rise. This affects the order pipeline of established biogas plant manufacturers like the German WELTEC BIOPOWER GmbH. Meanwhile, the project list includes about 30 French biogas plants. Some of these projects are rolled out in cooperation with Méthalac from Lyon, France.

This expertise was one of the reasons why WELTEC BIOPOWER and Méthalac received an order for a biogas project with gas processing in summer 2014. The plant in the north of the Franche-Comté region on the Swiss border will be completed in spring 2015, after which it is expected to supply biomethane to the French natural gas grid at a rate of 70 standard m³/h.

Thus, the plant stands witness to the increasing importance of the processing of biogas to biomethane.
Though France only has five plants with gas feed-in, the population is growing, especially in view of the
ample supply of biomaterials. This is also the case with the plant in Franche-Comté. The biomethane is
processed from 6,000 t of agricultural waste, such as cattle manure, pig manure, intertillage and starch.
These are digested in a stainless steel fermenter with a capacity of about 1,500 m³.

“To me, the tax advantage is a major argument in favour of a WELTEC plant“, says David Peterschmitt, the operator of the plant. He adds: “Bolted stainless steel containers are not included in the calculation of the cultivated area. In this way, the assessment base for the CFE land tax is reduced. This is a significant advantage over concrete containers.“

Based on the personal impression that he gained about the durability of established WELTEC plants during a visit to Germany, the builder draws attention to another positive aspect: “The tax advantage would evaporate if the maintenance costs were high. Accordingly, the condition of the two inspected biogas plants built in 2003 and 2010 convinced me of the longevity of stainless steel as a material and confirmed by decision to work with WELTEC."

Together with Biogaz Services from Metz-Tessy, Méthalac will be responsible, not only for the installation
and commissioning, but also for the maintenance of the WELTEC biogas plants. The team boasts a wealth
of experience, especially in connection with the employed WELTEC material, and will ensure perpetually
stable, economic operation. Once word gets around about the pros of biogas and biomethane plants, the
French will succeed in making consistent use of their wealth of raw materials.


Events

Securika

Apr 16 2024 Moscow, Russia

IE Expo China 2024

Apr 18 2024 Shanghai, China

Hannover Messe

Apr 22 2024 Hannover, Germany

Asia Water 2024

Apr 23 2024 Kuala Lumpur, Malaysia

IFAT Brasil

Apr 24 2024 Sao Paulo, Brasil

View all events